|
|
|
|
|
|
|
|
|
Hand-Held
& Pneumatic Sealant Dispensers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Valco
BOLTCOATERS are designed to dispense Hylomar®
or similar materials right out of the container. A BOLTCOATER unit
reduces the labor-intensive task of coating bolts or brushing sealant
onto threads. Each unit quickly applies a clean, even coating of material
directly onto bolt threads. The closed system design reduces mess
and exposure to fumes. |
|
|
|
|
|
|
|
|
Applicator
heads for both the Hand-Held and Pneumatic BOLTCOATERS are available
for several standard and specialty bolt sizes. Applicator heads are
easily changed simply unscrew one applicator head and attach
another. |
|
|
|
|
|
|
|
|
The
Hand-Held BOLTCOATER dispenses material through a special applicator
head. Utilizing Valcos Tube
Grip, one 100-gram tube of Hylomar coats approximately 300
7/16" cylinder head bolts at a rate of one bolt every three to
four seconds. Results vary with bolt size and amount dispensed per
bolt. |
|
|
|
|
|
|
|
|
|
|
|
Valcos
Pneumatic BOLTCOATER has an adjustable timer that controls the amount
of product dispensed. Once set, it dispenses the same amount each
time. The dispensing valve on the unit is fitted with an applicator
head that permits custom coating of various bolt sizes. Bolts are
coated quickly and uniformly, saving time and material cost. |
|
|
|
|
|
|
|
Hylomar
is available in 12-ounce cartridges that thread directly into the
pneumatic unit. The product is dispensed direct from the cartridge,
eliminating the need to transfer product from one container to another.
One cartridge of Hylomar
coats approximately 1,500 head bolts with the Pneumatic BOLTCOATER
at a rate of about one bolt every two seconds. Results vary with bolt
size and amount dispensed per bolt.
|
|
|
|
|